Technical information

ADC Telecommunications, Inc.
354 CHAPTER 2: CUDA 12000 BASE SYSTEM COMMANDS
route-map
Defines a route map to control and modify RIP and OSPF routing information. A route map is
identified by its map-tag.
If you specify a route-map that exists, this command enters configuration mode for that
route-map. If you specify a new route-map, then the system creates the route map and enters
configuration mode for the new route-map.
You can permit or deny that routes be advertised or learned, or define the properties with which
these routes are distributed. You add route-maps to map-lists to create route filters. These
route-maps serve as the criteria that determine which routes to match, and specify the action to
take for all matching routes.
Mode
To create an import route-map for RIP routes:
router:rip:import
To create an export route-map for RIP routes:
router:rip:export
To create an import route-map for OSPF routes:
router:ospf:import
To create an export route-map for OSPF routes:
router:ospf:export