Technical information

ADC Telecommunications, Inc.
350 CHAPTER 2: CUDA 12000 BASE SYSTEM COMMANDS
reset
Use this command to reboot a module. This command resets an active slot. When you reset the
slot, the module that resides in the selected slot reboots. You can use this command to remotely
reboot the management module in slot 1/13
.
If you issue the command with no arguments, a soft reboot is performed.
Mode
slot(<c/s>)
Syntax
reset [{hard | soft}]
Arguments
Example
The following example resets the module that is installed in slot 1/1.
cli:172.16.19.10:root# slot 1/3
mode: slot(1/3)
cli:172.16.19.10:slot(1/3)# reset
cli:172.16.19.10:slot(1/3)#
Related Commands
■ slot on page 555
{hard | soft} Specifies one of the following values:
■ hard – Resets the module without rebooting it.
■ soft – Reboots the module.