Technical information

ADC Telecommunications, Inc.
348 CHAPTER 2: CUDA 12000 BASE SYSTEM COMMANDS
report
Enables the sending of the OSPF neighbor state trap and the OSPF virtual neighbor state trap.
Use the no form of the command to disable sending of these traps.
Mode
router:ospf
Syntax
report {ospf-nbr-state | ospf-virt-nbr-state}
no report {ospf-nbr-state | ospf-virt-nbr-state}
Arguments
{ospf-nbr-state |
ospf-virt-nbr-state}
Specifies one of the following values:
■ ospf-nbr-state – Enables sending of the OSPF neighbor state
trap. When used with the no form of the command, this
argument disables sending of the OSPF neighbor state trap.
■ ospf-virt-nbr-state – Enables sending of the OSPF virtual
neighbor state trap. When used with the no form of the
command, this argument disables sending of the OSPF virtual
neighbor state trap.
In addition to enabling these traps using the report command,
you must also configure their corresponding notification types
using the snmp-server host command in order to send the traps
to SNMP hosts.