Technical information

Cuda 12000 IP Access Switch CLI Reference Guide
privacy multicast mac 341
privacy multicast mac
Assigns a multicast security association to a cable modem, thereby authorizing the modem for
access to a specific downstream multicast flow. This command applies to BPI+ only.
This security association is created using the privacy multicast ip command. Use the no
privacy multicast mac command to remove the security association from a cable modem.
Mode
interface:cable:csi(<c/s/i>)
Syntax
privacy multicast mac <mac-address> said <number>
no privacy multicast mac <mac-address> said <number>
Arguments
Example
cli:cable:csi(1/1/1)# show privacy multicast ip
row count: 1
Index IP Address IP Mask SAID SA Type Encrypt Alg Authent
Alg
----- --------------- --------------- ----- ------- ------------ -------
1 239.2.2.2 255.255.255.255 8192 dynamic des56cbcMode none
cli:cable:csi(1/1/1)# privacy multicast mac 00:10:95:04:0a:c3 said 8192
Related Commands
■ privacy multicast ip on page 339
■ show privacy multicast on page 504
<mac-address> Specifies the MAC address of the cable modem.
said <number> Specifies the SAID of the multicast SA. Use the show privacy multicast ip
command to display available SAIDs. Values range from 8192 to 16383.