Technical information

Cuda 12000 IP Access Switch CLI Reference Guide
privacy ca-cert 335
privacy ca-cert
Specifies manufacturer certification authority (CA) X.509 certificates. The manufacturer CA
certificate is used to validate the authenticity of manufacturer CAs who issue cable modem (CM)
certificates. This command applies to BPI+ only.
When you specify a manufacturer CA certificate, you assign it an index number and a level of
trust. You must also specify the filename of the certificate.
The no privacy ca-cert <number> command removes the manufacturer CA certificate.
Mode
root
interface:cable:csi(<c/s/i>)
Syntax
privacy ca-cert <number> [{trusted | untrusted | chained | root}]
certificate <filename>
no privacy ca-cert <number>