Technical information

Cuda 12000 IP Access Switch CLI Reference Guide
privacy base enable-cert-validity-periods 333
privacy base enable-cert-validity-periods
Specifies whether certificates have their validity period checked against the current time of day.
This command applies to BPI+ only.
Mode
interface:cable:csi(<c/s/i>)
Syntax
privacy base enable-cert-validity-periods {true | false}
Arguments
Example
cli:cable:csi(1/1/1)# privacy base enable-cert-validity-periods true
Related Commands
■ show privacy auth on page 493
■ show privacy base on page 495
■ show privacy cm-cert on page 500
{true | false} Specifies one of the following values:
■ true – Sets the certificates to true. This means that their validity
is checked against the current time of day.
■ false – Sets the certificates to false. This means that their
validity is not checked against the current time of day.