Technical information

Cuda 12000 IP Access Switch CLI Reference Guide
no snmp-server host 297
no snmp-server host
Allows you to:
■ Remove an SNMP host entirely from the SNMP configuration. To do this, issue the no
snmp-server host command with only the <ip-address> argument.
■ Remove an SNMP host from the list of hosts that receive traps from the Cuda 12000.
■ Remove an SNMP host from the list of hosts that receive informs from the Cuda 12000.
■ Remove the mask from an SNMP host entry in the SNMP configuration.
The 127.0.0.1:54321 host entry is a special entry that CudaView uses to receive
traps from the chassis. Do not delete this entry.
Mode
root
Syntax
no snmp-server host <ip-address> [{traps | informs}] [mask]
[notification-type <type>...]
Arguments
<ip-address> IP address of the SNMP host.
{traps | informs} Specify one of these values:
■ traps – The specified host no longer receives traps from the Cuda
12000.
■ informs – The specified host no longer receives informs from the Cuda
12000.
mask Removes the IP address mask from the host entry. By removing the mask
from the SNMP host, you remove the host from the range of allowed hosts
for an SNMP community that has been configured with the specified mask.
You do not remove the host entry itself.
notification-type
<type>...
Specify one or more types of notification sent to the host that you want to
remove. See Table 2-3 on page 566 for more information on notification
types.