Technical information

ADC Telecommunications, Inc.
290 CHAPTER 2: CUDA 12000 BASE SYSTEM COMMANDS
no ppp timeout
Use this command to revert back to the default PPP authentication and retry timeout values; both
have a default value of 3.
Use the ppp timeout command to configure new PPP authentication and retry timeout values.
Mode
interface:pos:csi(<c/s/i>)
Syntax
no ppp timeout {authentication | retry}
Arguments
Example
cli# interface 1/3/1
mode: interface:pos:csi(1/3/1)
cli# no ppp timeout retry
cli#
Related Commands
■ interface on page 181
authentication Use this keyword to revert back to the default authentication timeout
value. This configures the interface to wait a maximum of 3 seconds for
an authentication response. This parameter is currently not supported.
retry Use this keyword to revert back to the default PPP negotiation timeout
value. This configures the interface to wait a maximum of 3 seconds
between PPP negotiations.