Technical information

ADC Telecommunications, Inc.
284 CHAPTER 2: CUDA 12000 BASE SYSTEM COMMANDS
no ppp authentication
Disables Point-to-Point protocol (PPP) authentication on the current SONET interface. PPP
authentication is disabled by default. Note that authentication must be disabled on both
end-points of the SONET circuit.
To enable authentication on a selected interface, use the ppp authentication command.
Mode
interface:pos:csi(<c/s/i>)
Syntax
no ppp authentication
Example
cli# interface 1/3/1
mode: interface:pos:csi(1/3/1)
cli# no ppp authentication
cli#
Related Commands
■ interface on page 181
■ ppp authentication on page 322
■ show interface on page 414