Technical information

Cuda 12000 IP Access Switch CLI Reference Guide
no pos report 281
no pos report
Disables logging of select SONET alarms. For more information about SONET alarms and
reporting, see the pos report command.
Mode
interface:pos:csi(<c/s/i>)
Syntax
no pos report {lais|lrdi|pais|plop|prdi|sd-ber|sf-ber|slof|slos}
Arguments
Example
cli# interface 1/3/1
mode: interface:pos:csi(1/3/1)
cli# no pos report lais
cli#
Related Commands
■ interface on page 181
■ pos report on page 317
■ show interface pos on page 437
lais Disables line alarm indication signal error reporting.
lrdi Disables report line remote defect indication error reporting.
pais Disables path alarm indication signal error reporting.
plop Disables path loss of pointer error reporting.
prdi Disables path remote defect indication error reporting.
sd-ber Disables signal degradation BER error reporting.
sf-ber Disables signal failure BER error reporting.
slof Disables section loss of frame error reporting.
slos Disables section loss of signal error reporting.