Technical information

Cuda 12000 IP Access Switch CLI Reference Guide
no loop 275
no loop
Turns off loopback testing on the current interface. You can use the loop command to enable
and configure loopback testing.
Mode
interface:pos:csi(<c/s/i>)
Syntax
no loop {internal | line}
Arguments
Example
cli# interface 1/3/1
mode: interface:pos:csi(1/3/1)
cli# no loop internal
cli#
Related Commands
■ interface on page 181
■ loop on page 247
■ show interface pos on page 437
internal Disables internal loopback testing.
line Disables line loopback testing.