Technical information

Cuda 12000 IP Access Switch CLI Reference Guide
no clock-source 265
no clock-source
Configures the POS interface to obtain its clock source from the incoming receive network (the
default behavior). The system uses this clock to synchronizing SONET transmission.
Use the clock-source command to configure the SONET transmission clock-source for the
current interface.
Mode
interface:pos:csi(<c/s/i>)
Syntax
no clock-source
Example
cli# interface 1/3/1
mode: interface:pos:csi(1/3/1)
cli# no clock-source
cli#
Related Commands
■ clock-source on page 87
■ interface on page 181
■ show interface pos on page 437