Technical information

ADC Telecommunications, Inc.
250 CHAPTER 2: CUDA 12000 BASE SYSTEM COMMANDS
lookup
Enables and disables the Jini lookup service on the Cuda 12000. Jini provides a simple
platform-independent environment for delivering network services and for enabling interaction
between programs that use these services. Note that at least one Jini lookup service should be
running on the attached network in order to support multi-chassis groups. Two lookup services
are recommended (redundancy).
Mode
root
Syntax
lookup {enable | disable}
Arguments
Example
cli:192.168.208.3:root# lookup disable
# rmid (pid 840 781 776 773 770 769 767 766 764 762 761 760 718 717 716 701
699
696 694 545) is running...
# Stopping RMI activation daemon:
cli:192.168.208.3:root# lookup enable
Please wait, this may take some time ...
# rmid is stopped
# Starting RMI activation daemon: OK
#
# JINI lookup service (reggie) is running.
cli:192.168.208.3:root# show lookup
Related Commands
■ chassis on page 77
■ show lookup on page 453
{enable | disable} Specifies one of the following values:
■ enable – Enables the Jini lookup service.
■ disable (default) – Disables the Jini lookup service.