Technical information

Cuda 12000 IP Access Switch CLI Reference Guide
link-trap 249
link-trap
Enables link up and link down traps for an interface. Use the no form of the command to disable
link up and link down traps for an interface.
Mode
interface:<type>:<c/s/i>
Syntax
link-trap
no link-trap
Example
cli:192.168.208.3:interface:cable:csi(1/1/1)# link-trap
cli:192.168.208.3:interface:cable:csi(1/1/1)# show link-trap
Link Up/Down Trap Enable Enabled
cli:192.168.208.3:interface:cable:csi(1/1/1)# no link-trap
cli:192.168.208.3:interface:cable:csi(1/1/1)# show link-trap
Link Up/Down Trap Enable Disabled
Related Commands
■ show link-trap on page 452