Technical information

Cuda 12000 IP Access Switch CLI Reference Guide
ip rip split-horizon 241
ip rip split-horizon
Configure the interface to implement split horizon. Split horizon specifies that if a router learns a
route from an update received on the interface, then the router does not advertise that route on
updates that it transmits on the interface.
Use the no form of the command to disable split horizon on the interface.
Mode
interface:<type>:csi(<c/s/i>):ip-address(<ip-address>)#
Syntax
ip rip split-horizon
no ip rip split-horizon
Example
cli:# interface 1/1/1
mode: interface:cable:csi(1/1/1)
cli:# ip address 201.1.1.1 255.255.255.0
cli:# ip rip split-horizon
cli:# show ip rip
IP Address 201.1.1.1
Send Version RIPv1 Compatible
Receive Version RIPv1 Or RIPv2
Cost 1
Authentication ON False
Authentication Type No Authentication
Authentication Key Id 0
Send Default Only True
Send Default Also False
Default Cost 3
Accept Default True
Accept Host Route True
Split Horizon True
Poisoned Reverse True
Status Active