Technical information

Cuda 12000 IP Access Switch CLI Reference Guide
ip rip send default-only 239
ip rip send default-only
Configures the interface to advertise the default route only. The interface advertises no other
routes. Use the no form of the command to disable advertising the default route only on the
interface.
Mode
interface:<type>:csi(<c/s/i>):ip-address(<ip-address>)#
Syntax
ip rip send default-only
no ip rip send default-only
Example
cli:# interface 1/1/1
mode: interface:cable:csi(1/1/1)
cli:# ip address 201.1.1.1 255.255.255.0
cli:# ip rip send default-only
cli:# show ip rip
IP Address 201.1.1.1
Send Version RIPv1
Receive Version RIPv1 Or RIPv2
Cost 1
Authentication ON False
Authentication Type No Authentication
Authentication Key Id 0
Send Default Only True
Send Default Also False
Default Cost 3
Accept Default True
Accept Host Route True
Split Horizon True
Poisoned Reverse True
Status Active