Technical information

Cuda 12000 IP Access Switch CLI Reference Guide
ip rip default cost 223
ip rip default cost
Enter the cost or metric that is to be used for the default route entry in RIP updates originated on
this interface. A value of zero indicates that no default route should be originated; in this case, a
default route via another router may be propagated.
Before you can specify a default cost, you must first issue the ip rip send default only or
ip rip send default also command.
Mode
interface:<type>:csi(<c/s/i>):ip-address(<ip-address>)#
Syntax
ip rip default cost <number>
Arguments
<number> A number from 0 to 15. The default is 1.