Technical information

ADC Telecommunications, Inc.
216 CHAPTER 2: CUDA 12000 BASE SYSTEM COMMANDS
ip rip accept host-route
Configures the interface to accept host routes that neighbor routers advertise. A host route is
one in which the destination IP address identifies a specific host, rather than a network or
subnet. Use the no form of the command to disable host route acceptance.
Mode
interface:<type>:csi(<c/s/i>):ip-address(<ip-address>)#
Syntax
ip rip accept host-route
no ip rip accept host-route
Example
cli:# interface 1/1/1
mode: interface:cable:csi(1/1/1)
cli:# ip address 201.1.1.1 255.255.255.0
cli:# ip rip accept host-route
cli:# show ip rip
IP Address 201.1.1.1
Send Version RIPv1
Receive Version RIPv1 Or RIPv2
Cost 1
Authentication ON False
Authentication Type No Authentication
Authentication Key Id 0
Send Default Only False
Send Default Also True
Default Cost 5
Accept Default True
Accept Host Route True
Split Horizon True
Poisoned Reverse True
Status Active