Technical information

ADC Telecommunications, Inc.
214 CHAPTER 2: CUDA 12000 BASE SYSTEM COMMANDS
ip rip accept default-route
Configures the interface to accept default routes that neighbor routers advertise. The default
route is the one that routers select when they do not have a specific route to a destination
network, subnetwork, or host. Use the no form of the command to disable default route
acceptance.
Mode
interface:<type>:csi(<c/s/i>):ip-address(<ip-address>)#
Syntax
ip rip accept default-route
no ip rip accept default-route
Example
cli:interface:ethernet:csi(1/11/1)# ip address 192.168.16.3 255.255.255.0
cli:interface:ethernet:csi(1/11/1):ip-address(192.168.16.3)# ip rip accept
default-route
cli:interface:ethernet:csi(1/11/1):ip-address(192.168.16.3)# show ip rip
IP Address 192.168.16.3
Send Version RIPv2
Receive Version RIPv1 Or RIPv2
Cost 1
Authentication ON False
Authentication Type No Authentication
Authentication Key Id 0
Send Default Only False
Send Default Also False
Default Cost 0
Accept Default True
Accept Host Route True
Split Horizon True
Poisoned Reverse True
Status Active