Technical information

Cuda 12000 IP Access Switch CLI Reference Guide
ip address 183
ip address
Adds an IP address to the current interface and enters configuration mode for that IP interface.
Mode
interface:<type>:csi(<c/s/i>)
Syntax
ip address <ip-address> <mask> [{other | secondary | primary}]
Arguments
<ip-address> IP address that you want to add to the current interface.
<mask> Network mask for the specified interface that you want to add to
the interface.
{other | primary |
secondary}
Specifies one of the following values:
■ other – Specify this parameter if you are adding the IP address
of a network other than the primary or secondary on the
current interface.
■ primary – Specify this parameter if you are adding the IP
address of a primary network on the current interface. If you
do not specify an optional parameter (other, secondary,
primary), the interface is added as a primary interface by
default. Keep in mind that the last IP interface that you add is
the primary (by default) unless you specify otherwise.
■ secondary – Specify this parameter if you are adding the IP
address of a secondary network on the current interface.