Technical information

ADC Telecommunications, Inc.
158 CHAPTER 2: CUDA 12000 BASE SYSTEM COMMANDS
enable
Enables administrative access to the command line interface. You can only use CLI commands
after you log in to the administration console using this command. Upon initial Telnet into the
system, you would use this command to access the Cuda12000 command line interface
environment.
To access the command line interface, use the enable command to log into the CLI environment.
Note that you can use the
no enable command to log out of the CLI environment.
Mode
Any.
Syntax
enable <username>
You are then prompted for the administrative account password.
password <password>
Arguments
Example
cli:null:root> enable root
password: ***
Related Commands
■ no enable on page 269
<username> User name as assigned by the system administrator.
<password> Password for the specified user account.