Technical information

ADC Telecommunications, Inc.
156 CHAPTER 2: CUDA 12000 BASE SYSTEM COMMANDS
duplex
Sets the duplex mode on an Ethernet port.
Mode
interface:ethernet:csi(<c/s/i>)
Syntax
duplex {auto | full | half}
Arguments
{auto | full | half} Specifies one of the following values:
■ auto – Duplex mode is automatically configured. Note that, if
you configure the port to automatically negotiate duplex
mode, you also set the port to automatically negotiate speed.
■ full – Sets the port to full-duplex mode (port can send and
receive simultaneously). Note that, if you configure the port for
full duplex or half duplex, you also set the speed to it’s last
explicit setting (10 or 100).
■ half – Sets the port to half-duplex mode (port cannot send and
receive simultaneously).