Technical information

ADC Telecommunications, Inc.
150 CHAPTER 2: CUDA 12000 BASE SYSTEM COMMANDS
downstream interleave-depth
Sets the interleave-depth used for downstream ports on a selected CMTS card.
Mode
interface:cable:csi(<c/s/i>)
Syntax
downstream interleave-depth <number>
Arguments
Example
The following example configures the CMTS card in slot 1 of chassis 1 to use an interleave depth
of 128.
cli:172.16.19.10:root# interface 1/1/1
mode: interface:cable:csi(1/1/1)
cli:172.16.19.10:interface:cable:csi(1/1/1)# downstream interleave-depth 128
cli:172.16.19.10:interface:cable:csi(1/1/1)#
Related Commands
■ downstream frequency on page 148
■ downstream modulation on page 151
■ downstream no shutdown on page 153
■ downstream shutdown on page 154
■ downstream transmit-power on page 155
■ show interface cable <c/s/i> downstream on page 417
■ show downstream on page 403
<number> Interleave depth that you want the CMTS card to use:
■ DOCSIS Acceptable values: 8 |16 | 32 | 64 |128
■ EuroDOCSIS: Acceptable value: 12