Technical information

Cuda 12000 IP Access Switch CLI Reference Guide
cpe-control learnable 131
cpe-control learnable
Specifies whether the Cuda 12000 discovers CPE IP addresses associated with cable modems on
all CMTS interfaces by default. You can use the cm modify learnable command to override this
default setting on a modem-by-modem basis.
Use the no form of the command to disable the ability to discover CPE IP addresses.
Mode
Any.
Syntax
cpe-control learnable
no cpe-control learnable
Example
cli:interface:cable:csi(1/1/1)# cpe-control learnable
value = true
cli:interface:cable:csi(1/1/1)# show cpe-control
MAX IP 16
Active False
Learnable True
Related Commands
■ cm modify learnable on page 119
■ cpe-control active on page 130
■ cpe-control max-ip on page 132
■ show cpe-control on page 395
■ show interface cable <c/s/i> cpe-control on page 416