Technical information

Cuda 12000 IP Access Switch CLI Reference Guide
cm modify upstream 123
cm modify upstream
Moves the specified cable modem to a new upstream port. Note that the new upstream port
must be enabled (up).
Mode
interface:cable:csi(<c/s/i>)
Syntax
cm modify upstream <new-upstream-channel>
{<ip-address> | <mac-address> | <sid>}
Arguments
<new-upstream-channel> Specifies the upstream channel number. Values range from 1 to 4
for 1x4 modules and 1 to 6 for 1x6 modules.
{<ip-address> |
<mac-address> |
<sid>}
Specifies one of the following values:
■ <ip-address> – The IP address of the cable modem that you
want to reassign to the specified upstream port.
■ <mac-address> – The MAC address (in xx:xx:xx:xx:xx:xx format)
of the cable modem that you want to reassign to the specified
upstream port.
■ <sid> – The service identifier of the cable modem that you
want to reassign to the specified upstream port.
Use the show modem command to determine the IP address,
MAC address, and service identifier of the cable modem.