Technical information

Cuda 12000 IP Access Switch CLI Reference Guide
cm modify cpe-upstream 117
cm modify cpe-upstream
Assigns an upstream filter group to CPE devices that access the network through the
specified cable modem. The value that this command specifies overrides the default that the
cm-filter-default cpe upstream command specifies.
Mode
interface:cable:csi(<c/s/i>)
Syntax
cm modify cpe-upstream <group-id>
{<ip-address> | <mac-address> | <sid>}
Arguments
<group-id> Specifies the ID of a filter group, which you create using the cm-filter
command. Use the show cm-filter command to display available filter
groups. Specifying a value of 0 disables upstream filtering for the CPE
devices.
{<ip-address> |
<mac-address> |
<sid>}
Specifies one of the following values:
■ <ip-address> – The IP address of the cable modem that provides
network access to the CPE devices to which you assign the upstream
filter group.
■ <mac-address> – The MAC address (in xx:xx:xx:xx:xx:xx format) of
the cable modem that provides network access to the CPE devices to
which you assign the upstream filter group.
■ <sid> – The service identifier of the cable modem that provides
network access to the CPE devices to which you assign the upstream
filter group.
Use the show modem command to determine the IP address, MAC
address, and service identifier.