Technical information

Cuda 12000 IP Access Switch CLI Reference Guide
cm modify cpe-downstream 115
cm modify cpe-downstream
Assigns a downstream filter group to CPE devices that access the network through the
specified cable modem. The value that this command specifies overrides the default that the
cm-filter-default cpe downstream command specifies.
Mode
interface:cable:csi(<c/s/i>)
Syntax
cm modify cpe-downstream <group-id>
{<ip-address> | <mac-address> | <sid>}
Arguments
<group-id> Specifies the ID of a filter group, which you create using the cm-filter
command. Use the show cm-filter command to display available filter
groups. Specifying a value of 0 disables downstream filtering for the
CPE devices.
{<ip-address> |
<mac-address> |
<sid>}
Specifies one of the following values:
■ <ip-address> – The IP address of the cable modem that provides
network access to the CPE devices to which you assign the
downstream filter group.
■ <mac-address> – The MAC address (in xx:xx:xx:xx:xx:xx format) of
the cable modem that provides network access to the CPE devices to
which you assign the downstream filter group.
■ <sid> – The service identifier of the cable modem that provides
network access to the CPE devices to which you assign the
downstream filter group.
Use the show modem command to determine the IP address, MAC
address, and service identifier.