Technical information

Cuda 12000 IP Access Switch CLI Reference Guide
cm modify active 109
cm modify active
Enables the ability of the CMTS to perform subscriber management (IP address limits, filtering,
etc.) of CPE devices associated with the specified cable modem. This command overrides the
default that the cpe-control active command specifies.
Use the no form of the command to disable the ability of the CMTS to perform subscriber
management.
Mode
interface:cable:csi(<c/s/i>)
Syntax
cm modify active {<ip-address> | <mac-address> | <sid>}
no cm modify active {<ip-address> | <mac-address> | <sid>}
Arguments
{<ip-address> |
<mac-address> |
<sid>}
Specifies one of the following values:
■ <ip-address> – The IP address of the cable modem for which you
want to enable or disable subscriber management.
■ <mac-address> – The MAC address (in xx:xx:xx:xx:xx:xx format) of the
cable modem for which you want to enable or disable subscriber
management.
■ <sid> – The service identifier of the cable modem for which you want
to enable or disable subscriber management.
Use the show modem command to determine the IP address, MAC
address, and service identifier.