Campus-REX RS Interface Card User Manual
Table Of Contents
- About the Product
- Installing theCampusREXRS InterfaceCard
- Set Up the CampusREXSystem
- Configuring andMonitoring throughthe LCD
- Configuring with an ASCII Terminal
- Setting Up and Logging On to an ASCIITerminal
- Logging Onto a Remote Campus Unit
- Logging Off of a Campus Unit
- Using the Terminal Menus
- Returning Configuration Options to Default Values
- Configuring the CampusREX for SNMP Management
- Configuring Startup Parameters
- Configuring the CampusREX as a Master or Slave Unit
- Configuring Alarms
- Entering System Information
- Configuring Loopbacks
- Updating the CampusREX Firmware
- Monitoring with anASCII Terminal
- Internetworking and Management Overview
- Technical Reference
- Abbreviations
- The Documentation Set
- Contacting ADC
Configuring and Monitoring through the LCD
Campus-REX RS Interface Card User Manual 4-15
6 Press Next until the desired port displays, then press Enter.
7 Press Next to scroll through the statistics for the selected port.
8 To clear the counters, press Next until Press ENTER to clear
statistics displays, then press Enter.
9 When you have finished, press Escape to return to REX STATISTICS.
CAD1069i5.book Page 15 Thursday, May 30, 2002 7:32 AM