Campus-REX RS Interface Card User Manual
Table Of Contents
- About the Product
- Installing theCampusREXRS InterfaceCard
- Set Up the CampusREXSystem
- Configuring andMonitoring throughthe LCD
- Configuring with an ASCII Terminal
- Setting Up and Logging On to an ASCIITerminal
- Logging Onto a Remote Campus Unit
- Logging Off of a Campus Unit
- Using the Terminal Menus
- Returning Configuration Options to Default Values
- Configuring the CampusREX for SNMP Management
- Configuring Startup Parameters
- Configuring the CampusREX as a Master or Slave Unit
- Configuring Alarms
- Entering System Information
- Configuring Loopbacks
- Updating the CampusREX Firmware
- Monitoring with anASCII Terminal
- Internetworking and Management Overview
- Technical Reference
- Abbreviations
- The Documentation Set
- Contacting ADC
Table of Contents
Campus-REX RS Interface Card User Manual vii
TABLE OF CONTENTS
Chapter 1: About the Product_________________________1-1
Product Features..................................................................................1-2
Compatibility with Earlier Campus Products......................................1-2
Compatibility with Campus-RS Products ...........................................1-4
Establishing an HDSL Link ................................................................1-5
Application..........................................................................................1-6
Point-to-Point LAN Extension..............................................1-6
LAN Connections Over a WAN...........................................1-7
LAN Extension in a Routed Environment............................1-8
Chapter 2: Installing the Campus-REX RS
Interface Card ____________________________2-1
Install the Card ....................................................................................2-1
Installing into a Campus-RS Desktop Unit...........................2-2
Installing into a Campus-Star Chassis ..................................2-3
Connect the Ethernet Line...................................................................2-4
Choosing the Cable...............................................................2-4
Connecting the Cable............................................................2-6
Power Up and Check the Ethernet Line..............................................2-7
Chapter 3: Set Up the Campus-REX System_____________3-1
Set Up an ASCII Terminal..................................................................3-2
Connecting the ASCII Terminal to the Campus Unit...........3-3
Logging Onto the Terminal ..................................................3-5
Set the HDSL Operating Mode ...........................................................3-7
Using the LCD......................................................................3-8
CAD1069i5.book Page vii Thursday, May 30, 2002 7:32 AM