Campus-REX RS Interface Card User Manual
Table Of Contents
- About the Product
- Installing theCampusREXRS InterfaceCard
- Set Up the CampusREXSystem
- Configuring andMonitoring throughthe LCD
- Configuring with an ASCII Terminal
- Setting Up and Logging On to an ASCIITerminal
- Logging Onto a Remote Campus Unit
- Logging Off of a Campus Unit
- Using the Terminal Menus
- Returning Configuration Options to Default Values
- Configuring the CampusREX for SNMP Management
- Configuring Startup Parameters
- Configuring the CampusREX as a Master or Slave Unit
- Configuring Alarms
- Entering System Information
- Configuring Loopbacks
- Updating the CampusREX Firmware
- Monitoring with anASCII Terminal
- Internetworking and Management Overview
- Technical Reference
- Abbreviations
- The Documentation Set
- Contacting ADC
Campus-REX RS Interface Card User Manual E-3
Extended Mode
description ...................................1-4
HDSL Parameters menu ..3-16, 3-17
setting on ASCII terminal
...................................3-11 to 3-15
setting on LCD ................3-8 to 3-10
F
features .................................................1-2
firmware version ................................4-12
firmware version, updating ................5-24
frame statistics
ASCII terminal ..................6-8 to 6-9
LCD ...........................................4-14
H
HDSL
address .........................................7-9
alarm thresholds ........................5-15
Operating Mode ................1-2 to 1-5
setting .....................3-7 to 3-18
port address ...............................3-26
status
ASCII terminal .........6-2 to 6-6
LCD ...........................4-5, 4-14
timing ............................3-29 to 3-31
history of alarm conditions
ASCII terminal .......... 6-4, 6-6 to 6-7
LCD .............................................4-7
I
Image Load Mode ..................5-10 to 5-11
initiating loopbacks
ASCII terminal ..........................5-22
LCD ...........................................4-11
installing in
Campus-Star ............................... 2-3
desktop unit ................................. 2-2
interface card product information .... 4-12
IP router ............................................... 7-4
configuration .................3-23 to 3-28
table ........................................... 3-27
L
LAN address ........................................ 7-9
LAN IP Address ....................3-23 to 3-28
LAN Subnet Mask .................3-23 to 3-28
LCD
bridge configuration .................. 3-20
Master/Slave settings .................. 4-4
navigating menus ..............4-2 to 4-3
restoring default settings ............. 4-3
timing source ............................ 3-30
viewing and configuring alarms .......
4-5 to .................................... 4-10
legacy Campus products ...................... 1-2
Line address ......................................... 7-9
Line IP Address .....................3-23 to 3-28
Line Subnet Mask ..................3-23 to 3-28
Line Unit compatibility ....................... 2-1
Link alarm ............................................ 4-5
LINK LED ........................................... 2-7
local alarms
history ...............................6-6 to 6-7
LCD ............................................ 4-8
local HDSL loopback ........................ 5-20
local IP address
bridge ............................3-21 to 3-23
router ......................................... 3-26
CAD1069i5.book Page 3 Thursday, May 30, 2002 7:32 AM