Campus-REX RS Interface Card User Manual
Table Of Contents
- About the Product
- Installing theCampusREXRS InterfaceCard
- Set Up the CampusREXSystem
- Configuring andMonitoring throughthe LCD
- Configuring with an ASCII Terminal
- Setting Up and Logging On to an ASCIITerminal
- Logging Onto a Remote Campus Unit
- Logging Off of a Campus Unit
- Using the Terminal Menus
- Returning Configuration Options to Default Values
- Configuring the CampusREX for SNMP Management
- Configuring Startup Parameters
- Configuring the CampusREX as a Master or Slave Unit
- Configuring Alarms
- Entering System Information
- Configuring Loopbacks
- Updating the CampusREX Firmware
- Monitoring with anASCII Terminal
- Internetworking and Management Overview
- Technical Reference
- Abbreviations
- The Documentation Set
- Contacting ADC
Campus-REX RS Interface Card User Manual C-1
C
THE DOCUMENTATION SET
This table describes the manuals and guides in the Campus-RS
documentation set.
Document Description
Campus-Star User
Manual
Contains instructions for setting up and using a
Campus-Star. The manual includes instructions for
installing Line Units and interface cards into the
Campus-Star chassis.
Campus-RS Line Unit
User Manual
Describes the features of the Campus-RS Line Unit
and provides installation instructions.
Campus-RS Desktop
Unit User Manual
Describes the features of the Campus-RS Desktop
Unit and provides instructions for installing interface
cards, and connecting the unit to an HDSL line.
Campus Interface Card
User Manuals
Describes the features of the individual Campus
interface cards, one card per manual, and contains
instructions for configuring and monitoring the
system through the cards.
CAD1069i5.book Page 1 Thursday, May 30, 2002 7:32 AM