Campus-REX RS Interface Card User Manual
Table Of Contents
- About the Product
- Installing theCampusREXRS InterfaceCard
- Set Up the CampusREXSystem
- Configuring andMonitoring throughthe LCD
- Configuring with an ASCII Terminal
- Setting Up and Logging On to an ASCIITerminal
- Logging Onto a Remote Campus Unit
- Logging Off of a Campus Unit
- Using the Terminal Menus
- Returning Configuration Options to Default Values
- Configuring the CampusREX for SNMP Management
- Configuring Startup Parameters
- Configuring the CampusREX as a Master or Slave Unit
- Configuring Alarms
- Entering System Information
- Configuring Loopbacks
- Updating the CampusREX Firmware
- Monitoring with anASCII Terminal
- Internetworking and Management Overview
- Technical Reference
- Abbreviations
- The Documentation Set
- Contacting ADC
Campus-REX RS Interface Card User Manual B-1
B
ABBREVIATIONS
2B1Q
2 Binary,1 Quaternary
BER
Bit Error Rate
CMU
Campus Management Unit
CTS
Clear to Send
DCE
Data Circuit-Terminating Equipment
DSR
Data Set Ready
DSX-1
DS1 Cross-connect Frame
DTE
Data Terminal Equipment
DTR
Data Terminal Ready
ES
Errored Seconds
HDLC
High-level Data Link Control
HDSL
High-bit-rate Digital Subscriber Lines
LOS
Loss of Signal
NVRAM
Non-volatile Random Access Memory
POTS
Plain Old Telephone Service
PPP
Point-to-Point Protocol
RD
Receive Data
RLSD
Receive Line Signal Detect
CAD1069i5.book Page 1 Thursday, May 30, 2002 7:32 AM