Campus-REX RS Interface Card User Manual
Table Of Contents
- About the Product
- Installing theCampusREXRS InterfaceCard
- Set Up the CampusREXSystem
- Configuring andMonitoring throughthe LCD
- Configuring with an ASCII Terminal
- Setting Up and Logging On to an ASCIITerminal
- Logging Onto a Remote Campus Unit
- Logging Off of a Campus Unit
- Using the Terminal Menus
- Returning Configuration Options to Default Values
- Configuring the CampusREX for SNMP Management
- Configuring Startup Parameters
- Configuring the CampusREX as a Master or Slave Unit
- Configuring Alarms
- Entering System Information
- Configuring Loopbacks
- Updating the CampusREX Firmware
- Monitoring with anASCII Terminal
- Internetworking and Management Overview
- Technical Reference
- Abbreviations
- The Documentation Set
- Contacting ADC
Technical Reference
Campus-REX RS Interface Card User Manual A-5
ASCII TERMINAL MENU REFERENCE
The illustration on the following pages shows the ASCII terminal menu
structure for the Campus-REX unit.
Main Menu
System Status Menu
System Settings
Menu
Diagnostics Menu
Remote Logon
24 Hour HDSL Performance History
HDSL Parameters
REX Statistics
Download Mode
* Option displays only when configuration is changed that requires you to save to
NVRAM and then RESET the modem.
7 Day HDSL Performance History
Local Alarm History Menu
Current System Status Menu
Data Port Settings
SNMP Configuration
Write NVRAM
Reset Interface Card*
Bridge/Router Configuration
System Parameters
Loopback Settings Menu
CAD1069i5.book Page 5 Thursday, May 30, 2002 7:32 AM