Datasheet

FS98O22
Rev. 1.6 91/146
Register PMCON at address 36H
property U-0 U-0 U-0 R/W-0 U-0 R/W-0 R/W-0 R/W-0
PMCON
PDMEN PMCS[2:0]
Bit7 Bit0
Bit 4 PDMEN: PDM Module enable flag (Please refer to Chapter 8 for details)
1 = PDM Module is enabled, GPIO Port 2 bit 2 could be defined as PDM output.
0 = PDM Module is disabled, GPIO Port 2 bit 2 could be defined as GPIO.
Bit 2-0 PMCS[2:0]: PDM CLK frequency Selector
111 = PDM CLK frequency is as MCK/128
110 = PDM CLK frequency is as MCK/64
101 = PDM CLK frequency is as MCK/32
100 = PDM CLK frequency is as MCK/16
011 = PDM CLK frequency is as MCK/8
010 = PDM CLK frequency is as MCK/4
001 = PDM CLK frequency is as MCK/2
000 = PDM CLK frequency is the same as MCK
property
R = Readable bit W = Writable bit U = unimplemented bit
- n = Value at Power On Reset ‘1’ = Bit is Set ‘0’ = Bit is Cleared X = Bit is unknown
FORTUNE'
Properties
For Reference Only