Datasheet

FS98O22
Rev. 1.6 63/146
Register PT1 at address 20H
property R/W-X R/W-X R/W-X R/W-X R/W-X R/W-X R/W-X R/W-X
PT1
PT1 [7:0]
Bit7 Bit0
Bit 7-0 PT1[7:0]: GPIO Port 1 data flag (Please refer to Section 7.1 for detail)
PT1[7] = GPIO Port 1 bit 7 data flag
PT1[6] = GPIO Port 1 bit 6 data flag
PT1[5] = GPIO Port 1 bit 5 data flag
PT1[4] = GPIO Port 1 bit 4 data flag
PT1[3] = GPIO Port 1 bit 3 data flag
PT1[2] = GPIO Port 1 bit 2 data flag
PT1[1] = GPIO Port 1 bit 1 data flag
PT1[0] = GPIO Port 1 bit 0 data flag
Register PT1EN at address 21H
property R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
PT1EN
PT1EN [7:0]
Bit7 Bit0
Bit 7-0 PT1EN [7:0]: GPIO Port 1 Input / Output control flag (Please refer to Section 7.1 for detail)
PT1EN[7] = GPIO Port 1 bit 7 I/O control flag ; 0 = defined as input port, 1 = defined as output port
PT1EN[6] = GPIO Port 1 bit 6 I/O control flag ; 0 = defined as input port, 1 = defined as output port
PT1EN[5] = GPIO Port 1 bit 5 I/O control flag ; 0 = defined as input port, 1 = defined as output port
PT1EN[4] = GPIO Port 1 bit 4 I/O control flag ; 0 = defined as input port, 1 = defined as output port
PT1EN[3] = GPIO Port 1 bit 3 I/O control flag ; 0 = defined as input port, 1 = defined as output port
PT1EN[2] = GPIO Port 1 bit 2 I/O control flag ; 0 = defined as input port, 1 = defined as output port
PT1EN[1] = GPIO Port 1 bit 1 I/O control flag ; 0 = defined as input port, 1 = defined as output port
PT1EN[0] = GPIO Port 1 bit 0 I/O control flag ; 0 = defined as input port, 1 = defined as output port
property
R = Readable bit W = Writable bit U = unimplemented bit
- n = Value at Power On Reset ‘1’ = Bit is Set ‘0’ = Bit is Cleared X = Bit is unknown
Register PT1PU at address 22H
FORTUNE'
Properties
For Reference Only