Datasheet

FS98O22
Rev. 1.6 108/146
Register NETD at address 1BH
property U-0 U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0
NETD
OP1EN SOP1P[2:0]
Bit7 Bit0
Bit 3 OP1EN: OPAMP enable flag. (Please refer to Section 10.2)
1 = OPAMP is enabled.
0 = OPAMP is disabled.
Bit 2-0 SOP1P[2:0]: OPAMP non-inverting input port signal multiplexer (Please refer to Section
10.2)
111 = The OPAMP non-inverting input port is connected to AIN7 (PT1[7])
110 = The OPAMP non-inverting input port is connected to AIN6 (PT1[6])
101 = The OPAMP non-inverting input port is connected to AIN5 (PT1[5]).
100 = The OPAMP non-inverting input port is connected to AIN4 (PT1[4]).
011 = The OPAMP non-inverting input port is connected to AIN3 (PT1[3]).
010 = The OPAMP non-inverting input port is connected to AIN2 (PT1[2]).
001 = The OPAMP non-inverting input port is connected to AIN1 (PT1[1]).
000 = The OPAMP non-inverting input port is connected to AIN0 (PT1[0]).
Property
R = Readable bit W = Writable bit U = unimplemented bit
- n = Value at Power On
Reset
‘1’ = Bit is Set ‘0’ = Bit is Cleared X = Bit is
unknown
FORTUNE'
Properties
For Reference Only