Datasheet

FS98O22
Rev. 1.6 104/146
Register PCK at address 15H
property U-0 U-0 U-0 U-0 R/W-0 R/W-0 U-0 U-0
PCK
-- S_CH1CK [1:0] -- --
Bit7 Bit0
Bit 3-2 S_CH1CK [1:0]: OPAMP Control Register (Please refer to Section 10.2)
11 = The OPAMP Chopper mode is enabled, and the Chopper frequency is CLK/1000
10 = The OPAMP Chopper mode is enabled, and the Chopper frequency is CLK/500
01 = The OPAMP Chopper mode is disabled. OPAMP input operation mode is set to be “-Offset”.
00 = The OPAMP Chopper mode is disabled. OPAMP input operation mode is set to be “+Offset”.
Property
R = Readable bit W = Writable bit U = unimplemented bit
- n = Value at Power On
Reset
‘1’ = Bit is Set ‘0’ = Bit is Cleared X = Bit is unknown
FORTUNE'
Properties
For Reference Only