Installation manual

6
SECTION II
SPECIFICATIONS/COMPONENT IDENTIFICATION
A. SPECIFICATIONS
Shaded areas are stated in metric equivalents
* For non-reversing models only.
** A minimum of 3/4” pipe must be supplied to the gas inlet for each dryer.
IMPORTANT: Steam dryers must be provided with clean, dry, regulated 80 PSI +/- 10 PSI (5.51
bars +/- 0.68 bars) air supply.
NOTE: ADC reserves the right to make changes in specifications at any time without notice or
obligation.
GasElectric
Steam
MAXIMUM CAPACITY (DRY WEIGHT) 75 lbs 34 kg
BASKET (TUMBLER) DIAMETER 37” 94 cm
BASKET (TUMBLER) DEPTH 36” 91.5 cm
BASKET (TUMBLER) MOTOR 1 HP* 0.746 kw
DOOR OPENING (DIAMETER) 21-1/2” 54.61 cm
BASKET (TUMBLER) VOLUME 22.4 cu. ft. 0.634 cu.m.
DRYERS PER 20’/40’ CONTAINER 10/20
DRYERS PER 45’/53’ TRUCK 24/26
VOLTAGE AVAILABLE 120-460v 1Ø-3Ø 50/60 Hz
APPROX. WEIGHT (UNCRATED) 716 lbs 324.8 kg
APPROX. WEIGHT (CRATED) 766 lbs 347.5 kg
HEAT INPUT 200,000 btu/hr 50,400 kcal/hr
AIRFLOW 1,200 cfm 33.98 cmm
INLET PIPE SIZE 3/4” F.P.T.**
VOLTAGE AVAILABLE 208-460v 1Ø-3Ø 50/60 Hz
APPROX. WEIGHT (UNCRATED) 721 lbs 327 kg
APPROX. WEIGHT (CRATED) 771 lbs 349.7 kg
AIRFLOW 1,200 cfm 33.98 cmm
VOLTAGE AVAILABLE 120-460v 1Ø-3Ø 50/60 Hz
APPROX. WEIGHT (UNCRATED) 757 lbs 343.4 kg
APPROX. WEIGHT (CRATED) 807 lbs 366.1 kg
AIRFLOW 1,350 cfm 38.23 cmm
COMPRESSED AIR VOLUME 0.75 cfh 0.02 cmh
AIR CONNECTION 1/8” F.P.T.
STEAM CONSUMPTION
BOILER HP
NORMAL LOAD
238.7 lbs/hr 108.3 kg/hr 7
OPERATING STEAM PRESSURE STEAM SUPPLY STEAM RETURN
125 PSI max 8.61 bars 1” F.P.T. 1” F.P.T.