Specifications
5
3916067 01.13
3. Mechanical Installation
3.1 Location
The ADC100 Control Unit must be installed indoors.
As shown in the diagram below, the control will be wired directly to a 120/1/60 VAC power supply. The control will also
be connected to the fan, appliance and damper (if used). For detailed wiring information, see Chapter 4.
3.2MountingtheControlUnit
The ADC100 control may be mounted directly to a wall. To mount, remove the cover and locate the (4) mounting
holes. Using the hole-pattern shown below, mount the control using #6 screws. Once it is attached, wire the unit in
accordance with Chapter 4.
ADC100
ENERVEX
ENERVEX
ADC100
PDS1
ADC100
DAMPER
(SOLD
SEPARATELY)
Fig.1
4 MOUNTING HOLES
5.0 in
(127 mm)
8.9 in
(227 mm)
Fig.2