User's Manual
Table Of Contents
- SECTION 1 General Information
- SECTION 2 InterReach Unison System Description
- SECTION 3 Unison Main Hub
- SECTION 4 Unison Expansion Hub
- SECTION 5 Unison Remote Access Unit
- SECTION 6 Designing a Unison Solution
- SECTION 7 Installing Unison
- 7.1 Installation Requirements
- 7.2 Safety Precautions
- 7.3 Preparing for System Installation
- 7.4 Unison Component Installation Procedures
- 7.5 Splicing Fiber Optic Cable
- 7.6 Interfacing a Main Hub to a Base Station or a Roof-top Antenna
- 7.7 Connecting Contact Alarms to a Unison System
- 7.8 Alarm Monitoring Connectivity Options
- SECTION 8 Replacing Unison Components
- SECTION 9 Maintenance, Troubleshooting, and Technical Assistance
- APPENDIX A Cables and Connectors
- APPENDIX B Compliance
- APPENDIX C Changes and New Capabilities
- APPENDIX D Glossary
Alarm Monitoring Connectivity Options
7-56 InterReach Unison Installation, Operation, and Reference Manual
CONFIDENTIAL D-620003-0-20 Rev K
7.8.6 Network Interface Unit (NIU)
Faults and warnings can also be diagnosed with SNMP using the NIU. The NIU sup-
ports complete interactions with Unison system:
• Gets, Sets, and Traps/Notification
The NIU enables access to multiple LGC systems at a site as follows:
• NIU-4P-NM-1 (Up to four Unison systems)
• NIU-10P-NM-1 (Up to ten Unison systems)
The LGC NIU includes a MIB for integrating into the Network Management System
(NMS) and supports SNMPv1 and SNMPv2c.
Figure 7-25 Network Interface Unit (NIU) Configuration Options
The NIU supports
SNMP access to
Unison / Accel systems
via Ethernet or
dialup
Modem
Can dedicate one
port for an external
modem
Network
Management
System (SNMP
Manager)
py
OR
PPP /
POTS
PPP /
POTS
Phone Line
Secure
TCP/IP
Network
Secure
TCP/IP
Network
Ethernet
Ethernet
Network
Interface Unit
(SNMP Proxy
Agent)
1
NIU-10P-NM-1 supports up to 10 Unison/Accel systems
NIU-4P-NM-1 supports up to 4 Unison/Accel systems (not expandable)