User's Manual

Help Hot Line (U.S. only): 1-800-530-9960 1-3
D-620003-0-20 Rev K CONFIDENTIAL
Conventions in this Manual
• Appendix A Cables and Connectors
This appendix contains connector and cable descriptions and requirements, as well
as cable pin outs and diagrams.
Appendix B Compliance
This appendix lists safety and Radio/EMC approvals.
• Appendix C Changes and New Capabilities
1
This appendix contains a hardware/firmware/software compatibility.
• Appendix D Glossary
The Glossary provides definitions of commonly-used RF and wireless networking
terms.
1.3 Conventions in this Manual
Table 1-1lists the type style conventions used in this manual.
Table 1-1 Type Style Conventions
Measurements are listed first in metric units, followed by U.S. Customary System of
units in parentheses. For example:
0° to 45°C (32° to 113°F)
The following symbols highlight certain information as described.
NOTE: This format emphasizes text with special significance or impor-
tance, and provides supplemental information.
1. For Japan, refer to the separate addendum: Japan Specification Document
Convention Description
bold Used for emphasis
BOLD CAPS
Labels on equipment
S
MALL CAPS AdminManager window buttons