User's Manual

Help Hot Line (U.S. only): 1-800-5 30-9960 7-41
D-620003-0-20 Rev K CONFIDENTIAL
Interfacing a Main Hub to a Base Station or a Roof-top Antenna
To connect two Main Hubs to a duplex repeater or base station, use one circulator and
one more coaxial jumper cable, as shown in Figure 7-11.
Figure 7-11 Connecting Two Main Hubs to a Duplex Repeater or Base Station
2 x 1 Power
Combiner/Splitter
N-male to N-male
Coaxial Jumper Cable
N-male to N-male
Coaxial Jumper Cables
2 x 1 Power
Combiner/Splitter
N-male to N-male
Coaxial Jumper Cable
Circulator
N-male to N-male
Coaxial Jumper Cable
to Repeater or
Base Station
between Combiner/Splitter and
N-male to N-male
Coaxial Jumper Cables
between Combiner/Splitter and
Main Hub’s Downlink Port
Main Hub’s Uplink Port
Insert attenuator, if needed