User's Manual

PN 8700-10 Help Hot Line (U.S. only): 1-800-530-9960 7-19
620003-0 Rev. A
PRELIMINARY Step 2: Set Operation Band
Command Buttons
•Apply
Clicking the
APPLY button issues the set band command to the Main Hub and all
downstream components, and initiates a system test.
In order for the system to complete the band configuration, the factory-set band of
all the attached RAUs must match the band command issued by the AdminMan-
ager software. If the band command matches the RAU’s, then the system band is
set. If the band command does not match, the command is rejected and a “Set band
error” message for that RAU is displayed.
•Back
Clicking the
BACK button returns AdminManager to the Step 1 panel.
•Next
Clicking the
NEXT button displays the Installation Wizard Step 3 panel. This button
is selectable only when the
APPLY function is successful.
• Cancel
Clicking the
CANCEL button quits the Installation Wizard and displays the Admin-
Manager Start window (Figure 7-2).