User's Manual
PN 8700-10 Help Hot Line (U.S. only): 1-800-530-9960 2-17
620003-0 Rev. A
PRELIMINARY RF End-to-End Performance
PCS
Table 2-9 PCS RF End-to-End Performance using 2 km of Single-Mode Fiber
Parameter
Typical
Downlink Uplink
Average gain with 75 m Cat-5/6 at 25°C (77°F)*
*The system gain is adjustable in 1 dB steps from 0 to 15 dB, and the gain of each RAU can be attenuated 10 dB in one step..
15 dB 15 dB
Ripple with 75 m Cat-5/6 2.5 dB 3 dB
Output IP3 38 dBm
Input IP3 –12 dBm
Output 1 dB Compression Point 26 dBm
TDMA output power per carrier when 16 carriers are present
4.0 dBm
GSM output power per carrier when 16 carriers are present
4.2 dBm
CDMA output power per carrier when 8 carriers are present
7.8 dBm
Noise Figure with 1 MH – 1 EH – 8 RAUs configuration
16 dB
Noise Figure with 1 MH – 4 EHs – 32 RAUs configuration
22 dB
Table 2-10 PCS RF End-to-End Performance using 1 km of Multimode Fiber
Parameter
Typical
Downlink Uplink
Average gain with 75 m Cat-5/6 at 25°C (77°F)*
*The system gain is adjustable in 1 dB steps from 0 to 15 dB, and the gain of each RAU can be attenuated 10 dB in one step..
15 dB 15 dB
Ripple with 75 m Cat-5/6 2.5 dB 3 dB
Output IP3 36.5 dBm
Input IP3 –14 dBm
Output 1 dB Compression Point 26 dBm
TDMA output power per carrier when 16 carriers are present
4.0 dBm
GSM output power per carrier when 16 carriers are present
4.2 dBm
CDMA output power per carrier when 8 carriers are present
7.8 dBm
Noise Figure with 1 MH – 1 EH – 8 RAUs configuration
16 dB
Noise Figure with 1 MH – 4 EHs – 32 RAUs configuration
22 dB