User's Manual

PN 9000-10 Help Hot Line (U.S. only): 1-800-530-9960 2-11
620021-0 Rev. A
DCS 1800 MHz
PCS 1900 MHz
UMTS 2.1 GHz
Table 2-5 DCS RF End-to-End Performance
Typical
Parameter Downlink Uplink
Average gain with 75 m Cat-5/6 at 25°C (77°F) (dB) 15 15
Downlink ripple with 75 m Cat-5/6 (dB) 2
Uplink ripple for center 35 MHz of DCS1 and DCS2, Full band for DCS4
with 75 m Cat-5/6 (dB)
2
Uplink gain roll off for Full band of DCS1 and DCS2 with 75 m Cat-5/6 (dB) 2
Output IP3 (dBm) 38
Input IP3 (dBm) –12
Output 1 dB Compression Point (dBm) 26
Noise Figure 1 Hub-8 RAUs (dB) 17
Table 2-6 PCS RF End-to-End Performance
Parameter
Typical
Downlink Uplink
Average gain with 75 m Cat-5 at 25°C (77°F) (dB) 15 15
Ripple with 75 m Cat-5 (dB) 2.5 3
Output IP3 (dBm) 38
Input IP3 (dBm) –12
Output 1 dB Compression Point (dBm) 26
Noise Figure 1 Hub-8 RAUs (dB) 16
Table 2-7 UMTS RF End-to-End Performance
Parameter
Typical
Downlink Uplink
Average Gain w/75 meters Cat-5/6 @ 25 ° C (dB) 15 15
Ripple w/75 meters Cat-5/6 (dB) 2.5 4
Noise Figure: 1 Accel Hub and 8 RAUs (dB) 16
Spurious Output Levels (dBm) <–30
UMTS TDD Band Spurious Output Level
1900–1920 MHz, 2010–2025 MHz (dBm/MHz)
<–52
Waveform Quality (at maximum power) (
ρ ) > 0.97 > 0.97
Output IP3 (dBm) 37
Input IP3 (dBm) –12
Output P1dB (dBm) 26