User's Manual

PN 8700-10 Help Hot Line (U.S. only): 1-800-530-9960 5-5
620003-0 Rev. B
5.3 Faults and Warnings
Both fault and warning conditions are reported to the Expansion Hub where they are
stored until the Main Hub queries system status. Only faults are indicated by LEDs.
For more information, see:
• page 9-10 for RAU faults.
• page 9-11 for RAU warnings.
• page 9-14 for RAU status messages.
5.4 Remote Access Unit Specifications
Table 5-3 Remote Access Unit Specifications
Specification Description
Dimensions (H
× W × D) 44 mm × 305 mm × 158 mm
(1.7 in. × 12 in. × 6.2 in.)
Weight < 1 kg (< 2 lb)
Operating Temperature –25° to +45°C (–13° to +113°F)
Non-operating Temperature –25° to +85°C (–13° to +185°F)
Operating Humidity, non-condensing 5% to 95%
RF Connectors
1 shielded RJ-45, female (Cat-5/6)
a
1 SMA, male (coaxial)
a. For system performance, it is important that you use only Cat-5/6 ScTP cable with shielded RJ-45 connectors.
LED Alarm and Status Indicators Unit Status (1 pair): • Link • Alarm
Maximum Heat Dissipation (W) 11
MTBF 282,207 hours