User's Manual

PN 8700-10 Help Hot Line (U.S. only): 1-800-530-9960 D-3
620003-0 Rev. B
Appendix D-2 Notes:
1. c – compatible; pc – partially compatible; nc – not compatible
2. Does not support DCS4 and GSM
3. Downstream lockout due to fault is incorrectly indicated as a lockout
4. Main Hub issues band command to RAU on first “F” detect (causes RAU to
attempt alarm recovery where Release 4 won’t)
5. Release 3.1 and 3 will flag most “warnings” as an error, which will open warning
contact closure and display warning icons in AdminManager, while Release 4
will flag most as “system status” and display status icons.
D.3 New Capabilites
• Supports GSM and EGSM frequency bands using the GSM RAU
• Supports the DCS4 band
Frequencies: DL 1815–1850 MHz, UL 1720–1755 MHz
• Supports globally downloading firmware updates to multiple units at the same
time (i.e., all RAUs in a system, then all of the Expansion Hubs, and finally the
Main Hub)
• Supports reclassification of status messages
Warning Icons Status Icons
Main Hub Main Hub
Expansion Hub Expansion Hub
RAU RAU