User's Manual

Table Of Contents

FlexWave Spectrum Remote Access Unit Installation Guide Page 27

OMNI ANTENNA SPECIFICATIONS

The Omni Antenna (4214-0727 or the Low PIM 4214-0727-P), shown in Figure 3, is a round radome with the

following specifications:

Ceiling mount, vertically polarized, omni directional antenna

Figure 3. Omni Antenna

Port 1 Port 2 Port 3

Gain, typical 2 dBi @ 698-960 MHz 2 dBi @ 698-960 MHz 3 dBi @1710-2170 MHz

3 dBi @ 1710-2170 MHz 3 dBi @ 1710-2170 MHz 3 dBi @ 2496-2690 MHz

Nominal impedance 50 Ohm

Polarization Vertical

VSWR < 2:1

Port-to-port isolation >15 dB min, 22 dB typical

PIM (@2x43 dBm) -153 dBc

Power rating 5 Watt

Mechanical

Dimension of Antenna (DxH) 215 x 72 mm

Weight Less than or equal to 1.65 lbs (0.75kg), including pigtails

Connector N (male)

Cable (pigtail) length 6 feet, plenum rated cable

Color White, UV protected plastic for outdoor use

Mounting hardware Screws, anchor, and butterfly nut for ceiling tile mount

Environmental

Operating temperature - 40°C to + 65°C

Shipping and Handling ISTA Procedure 1A

Ingress protection IP-42

Flammability UL94V0 (Materials)

Compliance ROHS compliant

NOTE: Two antennas per RAU is required for MIMO performance.

CAUTION! Maximum gain antenna allowed is 3dBi