User's Manual

Belden 7732A Coax Specifications
InterReach Spectrum Remote Access Unit Installation Guide Page 27
TECP-77-222 Issue 2 • 300001759666 Rev B • December 2013 © 2013 TE Connectivity Ltd.
APPENDIXC:OMNIANTENNA
TheOmniAntenna(4214‐0727),showninFigure3,isaroundradomewiththefollowing
specifications:
Figure3.Omni Antenna
NOTE: TwoantennasperRAUisrequiredforMIMOperformance.
WARNING! Maximumgainantennaallowedis3dBi
Port 1 Port 2 Port 3
Gain, typical 2 dBi @ 698-960 MHz 2 dBi @ 698-960 MHz 3 dBi @1710-2170 MHz
3 dBi @ 1710-2170 MHz 3 dBi @ 1710-2170 MHz 3 dBi @ 2496-2690 MHz
Nominal impedance 50 Ohm
Polarization Vertical
VSWR < 2:1
Port-to-port isolation >15 dB min, 22 dB typical
Power rating 5 Watt
Mechanical
Dimension of Antenna (DxH) 215 x 72 mm
Weight Less than or equal to 1.65 lbs (0.75kg), including pigtails
Connector N (male)
Cable (pigtail) length 6 feet, plenum rated cable
Color White, UV protected plastic for outdoor use
Mounting hardware Screws, anchor, and butterfly nut for ceiling tile mount
Environmental
Operating temperature - 40°C to + 65°C
Shipping and Handling ISTA Procedure 1A
Ingress protection IP-42
Flammability UL94V0 (Materials)
Compliance ROHS compliant
Ceiling mount, vertically polarized, omni directional antenna